UCDS Forum

EDIT: Current Mondeo / Fusion High Level IPC Firmware List:

Firmware Calibration Information:

SBL (Bootloader): EJ7T-14C025-AA or DP5T-14C025-CA

(All newer firmware (2016+) have thin blue needles for gauges)

For 2020 Fusion/Mondeo: - Does not support or show USA Speed Limit signs.
LS7T-14C026-AJC
LS7T-14C026-BJC
LS7T-14C088-AJC
LS7T-14C088-BJC
- Firmware Build Date: August 16, 2019

For 2019 Fusion/Mondeo: - Does not support or show USA Speed Limit signs.
KS7T-14C026-AJD
KS7T-14C026-BJD
KS7T-14C088-AJD
KS7T-14C088-BJD
- Firmware Build Date: March 22, 2019

For 2018 Fusion/Mondeo:
JS7T-14C026-AJB
JS7T-14C026-BJB
JS7T-14C088-AJB
JS7T-14C088-BJB
- Firmware Build Date: October 30, 2017

For 2016/2017 Fusion/Mondeo:
GS7T-14C026-AJE
GS7T-14C026-BJE
GS7T-14C088-AJE
GS7T-14C088-BJE
- Firmware Build Date: October 21, 2016

For 2015 Fusion/Mondeo: (This FS7T firmware has the thick blue needles for gauges - digital speedometer moved to center)
FS7T-14C026-AJG
FS7T-14C026-BJG
FS7T-14C088-AJG
FS7T-14C088-BJG
- Firmware Build Date: January 6, 2016

For 2015 Fusion/Mondeo: (This FS7T firmware has the thick blue needles for gauges - last version produced with digital speedometer on the right round screen area)
FS7T-14C026-AJF
FS7T-14C026-BJF
FS7T-14C088-AJF
FS7T-14C088-BJF
- Firmware Build Date: June 26, 2015

For 2013/2014 Fusion/Mondeo (Early 2015 Builds): (This firmware has thick blue needles and optional digital speedometer on right round screen area instead of middle)
DS7T-14C026-BJR
DS7T-14C026-AJN
DS7T-14C088-BJN
DS7T-14C088-AJN
- Firmware Build Date: May 30, 2014 - This build will only flash to a 2015+ Lincoln MKZ Cluster (2013/2014 MKZ IPC not supported - different hardware)

For 2013/2014 Fusion/Mondeo (Early 2015 Builds): (Original Mondeo Release - 512KB Firmware vs 1MB)
DS7T-14C026-BJM
DS7T-14C026-AJK
DS7T-14C088-BJK
DS7T-14C088-AJK
- Firmware Build Date: June 25, 2013 - This build will only flash to a 2013/2014 Lincoln MKZ Cluster (2015+ MKZ IPC not supported - different hardware)


______________________________________________________________________________________________________________________________________________________________________________________
Original Post:

Does UCDS allow a hardware part conversion of an IPC?

I have a USA - 2017 Lincoln MKZ cluster with hardware HP5T-10849-CE, but I would like to change it to be a Mondeo MK5 hardware DS7T-10849-BKR, or a DS7T-10849-BKP

Physically, I believe the internal boards are the exact same. I believe just the coded part number and firmware is different between them.
Is this something that can be done with UCDS. Can I obtain and force the firmware of the Mondeo onto this MKZ cluster?

MKZ My Mondeo Instrument Cluster Conversion Thread: http://www.2gfusions.net/showthread.php?tid=5855


-

This is the hardware I would like to convert this cluster to:

Lincoln MKZ Cluster Info:

IPC - Instrument Panel Control Module
Part number: HP5T-10849-CE
Strategy : HP5T-14C026-CE
Calibration: HP5T-14C088-CE
Odometer: 0.5 miles

May be try reflash in to CD391,
*Try on your risk.

SBL: EJ7T-14C025-AA
Part1: DS7T-14C026-BJR
Part2: DS7T-14C026-AJN
Cal 1: DS7T-14C088-BJN
Cal 2: DS7T-14C088-AJN

kroligoff писал(а):May be try reflash in to CD391,
*Try on your risk.

SBL: EJ7T-14C025-AA
Part1: DS7T-14C026-BJR
Part2: DS7T-14C026-AJN
Cal 1: DS7T-14C088-BJN
Cal 2: DS7T-14C088-AJN

Thank you... are these files the latest IDS version available for the DS7T-10849-BKR that you posted?
Curious... just in case does your database also show what a newer FS7T-10849-BKB... or BKA, would use for the latest version?

Would this also update the hardware part number in the unit so it is seen as the other model cluster.
Or would it still show up as a Lincoln MKZ cluster part number running the CD391 software?

Is there any way to back up the existing Part's/Cal with UCDS? As I think this newer MKZ cluster doesn't have files available to download yet. In case I need to restore the firmware to original.



Does UCDS allow writing mileage/odometer to this IPC?



I've noticed the .... BK* series for the CD391 Mondeo 5 is the same as what we use here in the USA for the CD391 Fusion.
BK Series is Gas Auto MPH with 2.0L Ecoboost Engine w/6F Automatic Transmission.

I just ordered my UCDS Adapter FULL with Anatoly, 3 days ago on the 7th... Just waiting for it to ship to me and will test this out.

Thanks for helping answer my questions.

I had a similar idea and bought a 2013 MKZ IPC DP5T-10849-CJ. The VBF loader successfully loads the EJ7T-14C025-AA File when using Fusion 2013 as car model, but the next step fails with the message "unable to erase flash". It does not depend on the calibration files (Lincoln MKZ or Ford Mondeo calibrations)....

Any idea's what happens?!

I tried flashing my Lincoln MKZ Cluster with both the 2016 and 2015 Mondeo Firmware and it gives me an error as well. I was able to program my mileage into the Lincoln cluster using Direct Configuration. (Which is funny because I got a Security error 33 when I tried to write mileage to a 2015 Fusion Cluster).
When I tried to go a forced firmware flash using VBF Loader it gave me that hardware part number error. However, when I use the update wizard it can read it just fine, just shows no updates available obviously.

<m module="IPC">
<d DID="F110" Desc="On-line Diagnostic Database Reference Number" Data="DS-EM2T-1A292-JAB"/>
<d DID="F111" Desc="ECU Core Assembly Number" Data="DS7T-14F094-AJA"/>
<d DID="F113" Desc="ECU Delivery Assembly Number" Data="HP5T-10849-CE"/>
<d DID="F124" Desc="ECU Calibration Data #1 Number" Data="HP5T-14C088-CE"/>
<d DID="F162" Desc="Software Download Specification Version" Data=""/>
<d DID="F163" Desc="Diagnostic Specification Version" Data="0x03"/>
<d DID="F188" Desc="Vehicle Manufacturer ECU Software Number" Data="HP5T-14C026-CE"/>
<d DID="F18C" Desc="ECU Serial Number" Data="HTCE31xxxx"/>

Was trying to flash either one of these file sets, my Lincoln MKZ cluster is from a 2017, so I figured I would try the 2016 software first...

SBL: EJ7T-14C025-AA

2016:
GS7T-14C026-AJD
GS7T-14C026-BJD
GS7T-14C088-AJD
GS7T-14C088-BJD

OR

2014/2015:
FS7T-14C026-AJG
FS7T-14C026-BJG
FS7T-14C088-AJG
FS7T-14C088-BJG

OR

2013/2014:
DS7T-14C026-BJR
DS7T-14C026-AJN
DS7T-14C088-BJN
DS7T-14C088-AJN

Hi Dan,

you must select HS3 instead of CAN_HS to get in touch with the IPC. The programming will then start and the bootloader will load successfully. I stuck at the next step when the programming of the first calibration file fails with a "can't erase flash" error ....

Greets Andreas

Are you putting a Lincoln MKZ Cluster in a Fusion?

Where did you find a Mondeo Lens/Mask or how did you get it to fit?

Thanks! I didn't even notice that CAN Bus was a drop down and thought it was selected automatically by VBF File.

You have to change the MKZ mask to a Mondeo mask (my Mondeo is originally fitted with the high level IPC, so its just two screws to convert it)

I am aware of that... I didn't realize you had a Mondeo. I thought you had a USA based Fusion.
Why did you get a 2013 MKZ cluster if you already had a Mondeo with that cluster?

I was messing around with the 2017 MKZ cluster I have...

First, I was able to successfully able to reprogram the mileage to match my Fusion cluster.

I also messed with the software on it. I overwrote the 2017 Lincoln MKZ Software with 2016 Ford Mondeo Software.
I tried the 2015 Mondeo software also which worked too.
I like the look of the needles on the gauges better on the 2016 Mondeo vs 2015 Mondeo. Mondeo Gauges are blue while Lincoln Gauges are white.

These are all pictures of the same physical cluster... I just messed with different Calibrations of software on it.

SBL: EJ7T-14C025-AA

2016:
GS7T-14C026-AJD
GS7T-14C026-BJD
GS7T-14C088-AJD
GS7T-14C088-BJD
- Firmware Build Date: September 20, 2016

2015:
FS7T-14C026-AJG
FS7T-14C026-BJG
FS7T-14C088-AJG
FS7T-14C088-BJG
- Firmware Build Date: June 1, 2016

2013/2014 (Not Tested):
DS7T-14C026-BJR
DS7T-14C026-AJN
DS7T-14C088-BJN
DS7T-14C088-AJN
- Firmware Build Date: August 8, 2014 (No Longer Updated)



2016 Mondeo: Thin Blue Needles for Gauges



2016 Mondeo:




2015 Mondeo: Thick Blue Needles for Gauges




2017 Lincoln MKZ: Thin White Needles for Gauges


2014 Fusion..... BORING I hate this RPM Gauge lol.

The MKZ cluster is an "investigation object" to learn more about the cluster software....

How did you manage the update via the wizard (i always saw "no update available") and are you sure that the firmware is updated? I would expect the blue Ford speedo and tacho needles?!

Yes they are blue needles, the camera brightness makes them look white.

What about the PDC?

Does it still work the correct way?