UCDS Forum

Hi,
I have a 2010MY Convers+ IPC (AM2T-10849-XC) and I want to install it on an older car (2008MY). This does not work as the airbag light is permanently on.
As for now, the m0tral conversion is not possible, and I saw that conversmod.de are offering an alternative.
Can anyone help me with some advice on how can I achieve this?
Thanks!

You have to buy a credit and choose the option for older cars !!!
Well, you can also consider other additional features, digital speed, or shutting open door annoying ...

This option is only for facelift modules (2011MY, BS7T-10849) as far as I know, not for 2010MY...

Yes, you're right. I did not notice what Convers + you have. The picture shows which type is ...

In your case, if the airbag lights up, you need to upload the latest firmware. (1007 for predfacelift and 1122 center facelift)
You will find this according to the rom version in the test mode.
After writing, erase all IPC errors. Reset the IPC module.
Then write the configuration from the BCM to the IPC for the car that will use the convers +.
There will be no other problem ...