UCDS Forum

Dear Colleagues,

I have manageg to kill the IPC on a Ford Focus RS 2017.
Pressed the wrong button.
Everything has been deleted in the IPC.
Now I managed to load the latest firmware from Ford website, but still some issues ongoing.
After the first start the IPC is working perfect. But after the restart I cannot see the temperature, cruise control and the chosen drive mode...

Could you please let me know which vbf files should be loaded into the module to ensure it is working correctly?
Top

HW Number: G1ET-10849-EJG

I have tried to load the calibration from ETIS but I did not help...

Could you please let me know all vbf files which I have to load via the VBF Uploader?
What else could be damaged after pressing "PROGRAMM EURO EEPROM CONFIGURATION" in the IPC section?

Solved
Loaded old firmware and afterwards did a update using the wizard!
And oroginal ipc backup has been restore (as built)

Hi wonder if you c an help me too then??

My IPC is working EXCEPY I've no DRIVE MODE option showing at all!!??

Have you a software that I can use to fix??

Thanks,
Nitemare.

I have described the solution.

Update Wizard - updated the module! - duration about 45 minutes!
Then loaded as built using Forscan and everything works now.

Hi do you have a file for the H/W ACM file??

My part number is F1BT-18C515-ZAM

I've everything else save for this?? Thanks.

I have the same problem. My drive mode switch is not working anymore. I probably need the file to play ...

Maybe I could have you too !?

My Car is a Focus Mk3 RS 2017

I would be very happy.

Greetings Benny