UCDS Forum

Hi,

When I press the button (physical or on screen) on the SYNC2, the seat heating starts at max, so three LEDs, then u need to press the button to lower the temp (2 LEDs then 1 LED for the minimum)

Possible this can be changed in UCDS or with Forscan (hex code?0 so it starts at the minimum temperature and u need to press the button to get 2 and then 3 LEDs (max. heat)?

Thanks!

dragunov писал(а):Hi,

When I press the button (physical or on screen) on the SYNC2, the seat heating starts at max, so three LEDs, then u need to press the button to lower the temp (2 LEDs then 1 LED for the minimum)

Possible this can be changed in UCDS or with Forscan (hex code?0 so it starts at the minimum temperature and u need to press the button to get 2 and then 3 LEDs (max. heat)?

Thanks!

7A7-01-03 0000 6E5B 46**

Try reversing the temperatures: 6E 5B 46 so try 0000 465B 6E** and see if that does what you want at 7A7-01-03 in the FCIM.

Ok. Thanks!

dragunov писал(а):Ok. Thanks!

Did that work for you?

Not able to try this just yet